BCuP-6 Silver PhosCopper Brazing Rod - 2% Silver - Flat - 1/8" x 0.05" x 20"

Description

Powered by
Frooition
All Items
See our eBay store for more great items >>
Shop Categories
Other
WELDING & CUTTING EQUIPMENT
OXY-FUEL EQUIPMENT
OTHER GAS REGULATORS
FILLER METALS
ABRASIVES
MAPP & PROPANE BRAZING TORCHES
WELDING CABLE
PVC VALVES
REFRIGERANT GASES
CARGO MANAGEMENT
GLOVES AND PROTECTIVE APPAREL
MAGNETIC HOLDERS
ELECTRODES OVENS/DRYERS
BCuP-6 Silver PhosCopper Brazing Rod - 2% Silver - Flat - 1/8" x 0.05" x 20"
Item Description
BCuP-6 Silver PhosCopper Brazing Rod - 2% Silver - Flat - 1/8" x 0.05" x 20"
Available
in 5 Sticks, 9 Sticks, 1 Lb (28 Sticks), 2 Lb (56 Sticks), 5 Lb and 10 Lb. Select your option from the menu.
USES:
SÜA SILVER PHOS-COPPER 2% is a low-cost brazing filler metal suitable for joining copper to copper & copper to copper alloys where critical impact or vibration stresses are not encountered in service. It should only be used on assemblies where good fit up can be maintained.
BRAZING CHARACTERISTICS:
SÜA Silver Phos-Copper 2% is a copper rich, filler metal that is self-fluxing on copper by virtue of its phosphorus content. SÜA SILVER PHOS-COPPER 2% has good flow and wetting properties on copper, brass, and bronze. Its melting characteristics are such that on the low end of its brazing temperature range it has "sluggish" flow characteristics which enable it to fill gaps better, making it ideal for loose-fitting joints. On the other hand, when brazing at high end of its brazing temperature range, it is very fluid, making ideal for tight-fitting joints requiring deep penetration.
The self-fluxing property of SÜA SILVER PHOS-COPPER 2% is effective on copper only. Copper base alloys, such as brass or bronze, may be brazed with SÜA SILVER PHOS-COPPER 2% but cannot be used on ferrous metals or nickel base alloys, since the phosphorus produces brittle iron or nickel phosphorus at the joint interface.
PROPERTIES OF BRAZED JOINTS:
The properties of a brazed joint are dependent upon numerous factors including base metal properties, joint design, metallurgical interaction between the base metal and the filler metal. When brazing copper alloys, the properties of joints with good fit-up should exhibit adequate performance.
CORROSION RESISTANCE:
The corrosion resistance of SÜA SILVER PHOS-COPPER 2% is comparable to that of copper except when exposed to Sulphur-containing compounds, particularly at elevated temperatures. Under these conditions SÜA SILVER PHOS-COPPER 2% undergoes progressive deterioration. Exposure to pressurized steam can also result in accelerated corrosion.
SPECIFICATIONS:
SÜA Silver Phos-Copper 2% alloy conforms to: Unified Numbering System (UNS) C55280 and American Welding Society (AWS) A5.8/A5.8M BCuP-6
SAFETY:
The operation and maintenance of brazing equipment or facility should conform to the provisions of American National Standard (ANSI) Z49.1, “Safety in Welding and Cutting.” Individuals requiring further information and Engineering Specification Documents may wish to contact the Engineering Society for Advanced Mobility, Land Sea Air and Space, The Society of Automotive Engineers http://www.sae.org/ (SAE AMS) or The American Welding Society (AWS) http://aws.org/
DISCLAIMER:
The information and recommendations contained in this publication have been provided without charge & compiled from sources believed to be reliable and to represent the best information available on the subject at the time of issue. No warranty, guarantee, or representation is made by Mundaka Technologies, Inc. as to the absolute correctness or sufficiency of any representation contained in this and other publications; Mundaka Technologies, Inc. assumes no responsibility in connection therewith; nor can it be assumed that all acceptable safety measures are contained in this (and other publications, or that other or additional measures may not be required under particular or exceptional conditions or circumstances.
Other Available SÜA Silver Brazing Alloys:
SÜA 45 % Silver - Bare - AWS BAg-5 - Size: 1/16" x 18"
SÜA 45% Silver - Fluxcoated - AWS BAg-5 - Size: 1/16" x 18"
SÜA 56% Silver - Bare - AWS BAg-7 - Size: 1/16" x 18"
SÜA 56% Silver - Fluxcoated - AWS BAg-7 - Size: 1/16" x 18"
SÜA - Silver Brazing Solder Wire - 45% - AWS BAg-5 - Size: 1/16" (1, 3 or 5 TOz)
SÜA - Silver Brazing Solder Wire - 56% - AWS BAg-7 - Size: 1/16" (1, 3 or 5 TOz)
BCuP-2 PhosCopper Brazing Rod - 0% Silver - Flat - 1/8" x 0.05" x 20"
BCuP-6 Silver PhosCopper Brazing Rod - 2% Silver - Flat - 1/8" x 0.05" x 20"
BCuP-3 Silver PhosCopper Brazing Rod - 5% Silver - Flat - 1/8" x 0.05" x 20"
BCuP-5 Silver PhosCopper Brazing Rod - 15% Silver - Flat - 1/8" x 0.05" x 20"
About Us
About Us
Payment
Shipping
Returns
Disclaimer
About Us
Mundaka Technologies, Inc is a US-based company with an inherited expertise of more than 35 years in the welding, cutting and industrial gases business. We serve the United States and the Latin American markets from our facilities in Fort Lauderdale FL. All of our products are selected with quality and affordability in mind. Our customer service team is always available and committed to answering our client's questions and needs. NO Answering Machines, NO Excuses.
Payment
Payment
We accept all major payment methods: PayPal, Visa, MasterCard, AMEX, Discover, and Bank Transfers. We charge 6% sales tax on all orders shipping within the State of Florida. We sell with tax exemption if we are provided by the customer with a valid Florida resale certificate.
Shipping
Shipping
We ship the same business day for orders placed before 15:00 EST. USPS Priority Mail (1-3 days) and FedEx Ground (1-5 days), are our preferred shipping methods and delivery dates may vary according to tho the final destination of the order. For smaller and lighter items we use USPS First Class (1-4 days). We offer free shipping to the 48 contiguous continental states.
Returns
Returns
If you are not happy with your product, just request a return on eBay or get in contact with us, We will accept your return and refund your payment, no questions asked!. If you changed your mind or bought a product by mistake, Just send it back! we will refund your payment. Is the product that you bought does not fit your current equipment, No problem, just call us and we will help you to find the right equipment for you and exchange it. We are committed to providing our customers with a solution.
Disclaimer
Disclaimer
Mundaka Technologies Inc offers products that can operate at high temperature, high pressure, and high voltage/amperage. These products are intended for professional or trained users. Mundaka Technologies does NOT sell any products intended to diagnose, treat, cure, or prevent any disease and the products bought from Mundaka Technologies Inc should never be used as a reference to measure or dosage medical oxygen or any other medical gases or substances to humans or animals. Mundaka Technologies, Inc. assumes no liability for misuses of this products. Some of the products offered here might be described as "Compatible with" other manufacturer´s equipment and brands. It is not in the Mundaka Technologies Inc intentions to resemble, copy, counterfeit or violate trademarks, patents, brands or any other form of intellectual property owned by other companies not affiliated, associated, authorized, endorsed by, or in any way officially connected to Mundaka Technologies Inc.
Helpful Links
Add to Favorite Sellers
Sign up to Newsletter
View Feedback
Contact Seller
Visit seller's eBay Shop
About Seller Page
More Items!
View more great items
SÜA Silver Brazing Solder Rod - Fluxcoated - 56% - AWS BAg-7 - Size: 1/16" x 18"
&dollar27.60
BCuP-2 PhosCopper Brazing Rod - 0% Silver - Flat - 1/8" x 0.05" x 20"
&dollar13.80
BCuP-3 Silver PhosCopper Brazing Rod - 5% Silver - Flat - 1/8" x 0.05" x 20"
&dollar11.00
BCuP-5 Silver PhosCopper Brazing Rod - 15% Silver - Flat - 1/8" x 0.05" x 20"
&dollar14.60
Powered by
Frooition
Frooition | No-js Template | eBay design, eBay store design, eBay shop design, eBay template design, eBay listing design (ver:froo_no_js)
This listing is currently undergoing maintenance, we apologise for any inconvenience caused.