Tannoy CMS 601 DC Full Range Loudspeakers

Description

Tannoy CMS 601 DC. Condition is New. Sold in pairs, Price is each. Buyer pays for shipping.
The Tannoy CMS 601DC is a full bandwidth; high power and high sensitivity ceiling monitor system; a compact unit that is specifically designed for applications requiring the combination of uncompromising 'superior quality' sonic performance for music and speech reinforcement, exceptional intelligibility and long term reliability.
The design comprises a 165 mm (6.5”) Dual Concentric™ point-source transducer mounted in a vented, injection moulded, paintable front baffle manufactured from UV/weather resistant UL94V-0 ABS material. Spring loaded self-aligning clamps make for quick and easy installation, while all models are also supplied with two tile support rails and one C-ring included in the package. A plaster (mud) ring is available as an optional accessory.
The zinc plated steel back cans have an integrated, recessed termination box. The removable locking connector has screw terminals for secure wire termination and "loop through" facility. Strain relief is provided by a clamping mechanism for use with plenum rated cable or conduit.
The CMS 601DC is equipped with a low insertion loss 60 W line transformer easily configurable to various tappings via front baffle mounted rotary switch, for use in constant voltage distributed audio systems. Two model variants are available (one 'blind-mount' version with integrated back can, the other without) and a separate back can are available to satisfy the vast majority of installation application requirements
System
Frequency Response (-3dB)
75Hz - 30kHz Back can
Frequency Range (-10dB)
50Hz - 30kHz Back can
System Sensitivity (1W @1m)
91dB (1W = 2.45V for 6W)
Nominal Coverage Angle
90 degrees conical
Coverage Angle (1kHz to 6kHz)
111 degrees
Directivity Factor (Q)
4.7 averaged 1kHz to 6kHz
Directivity Index (DI)
6.5 averaged 1kHz to 6kHz
Rated Maximum SPL
110dB (average), 116dB (peak)
Power Handling
Average: 80W, Programme: 160W, Peak: 320W
Recommended Amplifier Power
160W @ 8W
Nominal Impedance
8 ohms
Transformer Taps
70V: 60W / 30W / 15W / 7.5W / OFF & low impedance operation
100V: 60W / 30W / 15W / OFF & low impedance
Crossover
2kHz - 2nd order LF, 3rd Order HF (with dynamic HF protection)
Transducers
Low Frequency
165mm (6") Dual Concentric™ constant directivity driver with multi fibre paper pulp cone
High Frequency
25mm (1") titanium dome with neodymium magnet system
Physical
Enclosure
Back can: Zinc plated steel, Baffle: Reflex loaded UL 94V-0 rated ABS, Grille: Steel
Safety Features
Safety ring located at rear of enclosure for load bearing safety bond
Clamping Design
Min / Max Clamping Range: 8 mm (0.32") / 29 mm (1.14") Recommended Clamp Torque: 1.5Nm
Back Can Options
Complete with fixed back can
Cable Entry Options
Cable clamp & squeeze connector for conduit up to 22 mm
Conduit Knockouts
3 Sets of horizontal positions 19 / 22 / 28 mm (0.75” / 0.87” / 1.10”)
Connectors
Removable locking connector with screw terminals with "loop through" facility
Safety Agency Ratings (pending)
UL-1480, UL-2043, CE
Included Accessories
C Ring, tile bridge, paint mask, cutout template, grille
Optional Accessories
Plaster (mud) ring
Hole Cutout Diameter
253 mm (9.96")
Dimensions (Bezel Diameter)
280 mm (11.02")
Dimensions (Front of Ceiling to Rear of Back Can)
258 mm (10.16")
Dimensions (Front of Ceiling to Top of Safety Loop)
275.30 mm (10.84")
Weight (ea)
16.42 lbs (7.45 kg)